2.6的話是在
Device Drivers
ATA/ATAPI/MFM/RLL support
Generic PCI bus-master DMA support
你的dmesg看起來跟我的不大一樣......
我的長這樣(gentoo-dev-sources 2.6.9-r13)
Uniform Multi-Platform E-IDE deiver Reivsion: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1 (<--抓到晶片組)
ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb: DMA
ide1: BM-DMA at 0xa800-0xa80f, BIOS settings: hda:DMA, hdb: PIO (<--hdb沒接. 這兩行你沒有?)
.
.
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14 <---
Probing IDE interface ide1...
ide0 at 0x170-0x177, 0x376 on irq 15 <--
.
.
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
/dev/ide/host0/bus0/target1/lun0: p1
你的irq那兩行是放最後面耶. 不大一樣. 這是2.6版的輸出嗎? 還是是2.4的 :3
要不要說明一下你用的是哪種介面的硬碟, 哪種主機板 (VIA, Intel, etc.)
我的範例機器是Pentium 4, IDE (PATA)硬碟, Intel 850 chipset. (那種用rambus的孤兒機器)