gentoo安装后不能启动?

[phpasp]

UltraSPARC 5的机器,内存为256M 硬盘为HDD
按照手册安装后reboot,重启后停留在以下这里不动了,请帮忙看看,咋回事呢?
VFs: Mounted root(ext3 filesystem) readonly
Mounted devfs on /dev
FATAL: kernel too old
Unimplemented SPARC system call 188
Kernel panic: Attempted to kill init!
Press Li-Ato return to the boot prom


编译内核版本为2.4.32

[dxcdxc]

為什麼用那麼舊的核心阿？
不是都有2.6.15了？
裝的原始碼是哪種？
2.4幾乎已放棄使用。

[phpasp]

这样下载内核代码
　　#emerge sparc-sources
自动就下载的是2.4.32啊

我的光盘启动是2006.1的,核心是2.6.16呀

[Hydonsingore]

[phpasp]

oK,
ererge gentoo-sources
重新下载2.6.17的试试看
谢谢

[phpasp]

在编译.6.17时,出错了,什么回事呀?
livecd linux # make dep && make vmlinux image modules modules_install
*** Warning: make dep is unnecessary now.
CHK include/linux/version.h
make[1]: Warning: File `/usr/include/sys/types.h' has modification time 3.5e+07 s in the future
HOSTCC scripts/basic/fixdep
HOSTCC scripts/basic/split-include
HOSTCC scripts/basic/docproc
make[1]: warning: Clock skew detected. Your build may be incomplete.
SPLIT include/linux/autoconf.h -> include/config/*
CC arch/sparc64/kernel/asm-offsets.s
GEN include/asm-sparc64/asm-offsets.h
HOSTCC scripts/genksyms/genksyms.o
HOSTCC scripts/genksyms/lex.o
HOSTCC scripts/genksyms/parse.o
HOSTLD scripts/genksyms/genksyms
CC scripts/mod/empty.o
HOSTCC scripts/mod/mk_elfconfig
MKELF scripts/mod/elfconfig.h
HOSTCC scripts/mod/file2alias.o
HOSTCC scripts/mod/modpost.o
HOSTCC scripts/mod/sumversion.o
HOSTLD scripts/mod/modpost
HOSTCC scripts/kallsyms
HOSTCC scripts/pnmtologo
HOSTCC scripts/conmakehash
HOSTCC scripts/bin2c
CC init/main.o
In file included from include/linux/gfp.h:4,
from include/linux/slab.h:15,
from include/linux/percpu.h:4,
from include/linux/rcupdate.h:41,
from include/linux/pid.h:4,
from include/linux/sched.h:33,
from include/linux/module.h:10,
from init/main.c:16:
include/linux/mmzone.h:500:2: #error Allocator MAX_ORDER exceeds SECTION_SIZE
make[1]: *** [init/main.o] Error 1
make: *** [init] Error 2

[phpasp]

livecd linux # make dep && make vmlinux image modules modules_install
*** Warning: make dep is unnecessary now.
CHK include/linux/version.h
make[1]: Warning: File `/usr/include/sys/types.h' has modification time 3.5e+07 s in the future
HOSTCC scripts/basic/fixdep
HOSTCC scripts/basic/split-include
HOSTCC scripts/basic/docproc
make[1]: warning: Clock skew detected. Your build may be incomplete.
SPLIT include/linux/autoconf.h -> include/config/*
CC arch/sparc64/kernel/asm-offsets.s
GEN include/asm-sparc64/asm-offsets.h
make[2]: Warning: File `/usr/include/stdio.h' has modification time 3.5e+07 s in the future
HOSTCC scripts/genksyms/genksyms.o
SHIPPED scripts/genksyms/lex.c
SHIPPED scripts/genksyms/parse.h
SHIPPED scripts/genksyms/keywords.c
HOSTCC scripts/genksyms/lex.o
SHIPPED scripts/genksyms/parse.c
HOSTCC scripts/genksyms/parse.o
HOSTLD scripts/genksyms/genksyms
make[2]: warning: Clock skew detected. Your build may be incomplete.
CC scripts/mod/empty.o
make[2]: Warning: File `/usr/include/stdio.h' has modification time 3.5e+07 s in the future
HOSTCC scripts/mod/mk_elfconfig
MKELF scripts/mod/elfconfig.h
HOSTCC scripts/mod/file2alias.o
HOSTCC scripts/mod/modpost.o
HOSTCC scripts/mod/sumversion.o
HOSTLD scripts/mod/modpost
make[2]: warning: Clock skew detected. Your build may be incomplete.
make[1]: Warning: File `/usr/include/stdio.h' has modification time 3.5e+07 s in the future
HOSTCC scripts/kallsyms
HOSTCC scripts/pnmtologo
HOSTCC scripts/conmakehash
HOSTCC scripts/bin2c
make[1]: warning: Clock skew detected. Your build may be incomplete.
CC init/main.o
In file included from include/linux/gfp.h:4,
from include/linux/slab.h:15,
from include/linux/percpu.h:4,
from include/linux/rcupdate.h:41,
from include/linux/pid.h:4,
from include/linux/sched.h:33,
from include/linux/module.h:10,
from init/main.c:16:
include/linux/mmzone.h:500:2: #error Allocator MAX_ORDER exceeds SECTION_SIZE
make[1]: *** [init/main.o] Error 1
make: *** [init] Error 2
在编译gentoo2.6.17出现以上错误?
请帮忙看看,如何解决?

[scsi]

你要不要先試試 genkernel

另外gentoo source已經到2.6.18了，參考一下囉