[求助] 如何用compro videomate 看 cable tv

找不到Code如何播放,不知道要用什麼播放程式等等相關問題都可以在這發問

版主: Forums Team

[求助] 如何用compro videomate 看 cable tv

文章cching1112 » 週六 9月 25, 2004 10:48 am

我大致上已經搞好,但有些地方搞不定.我是用kdetvx來撥放,當kdetv在搜尋頻道時,我可以看到電視畫面.但當搜尋完成,我要轉台時,我得到以下的error.而且沒聲音.
chingc@tux ~ $ kdetv
kdetv: WARNING: Sourcemanager: No screenwidget set! Cannot scan video plugins!
kdetv: WARNING: OSDManager: No screenwidget set! Cannot scan OSD plugins!
kdetv: WARNING: MiscManager: No screenwidget set! Cannot scan Misc plugins!
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 1280x1024, depth=24, bpp=32, bpl=5120, base=0xd0000000
/dev/v4l/video0 [v4l2]: configuration done
Try to open v4l2 vbi device, libzvbi interface rev.
$Id: io-v4l2.c,v 1.25 2004/02/18 07:56:45 mschimek Exp $Opened /dev/v4l/vbi0
Try to open v4l2 (2002-10) vbi device, libzvbi interface rev.
$Id: io-v4l2k.c,v 1.18 2004/04/09 05:18:16 mschimek Exp $Opened /dev/v4l/vbi0
/dev/v4l/vbi0 (Compro VideoMate TV) is a v4l2 vbi device,
driver saa7134, version 0x0000020c
Current scanning system is 525
Querying current vbi parameters... success
VBI capture parameters granted: format 59455247, 27000000 Hz, 2048 bpl, offs 256, F1 10+12, F2 272+12, flags 00000000
Nyquist check passed
Request decoding of services 0x60000c7f
Will decode services 0x00000860
Using streaming interface
Fifo initialized
Requesting streaming i/o buffers
Mapping 16 streaming i/o buffers
Successful opened /dev/v4l/vbi0 (Compro VideoMate TV)
kdetv: WARNING: MainWindow::setupInfraRed(): Lirc not available
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 1280x1024, depth=24, bpp=32, bpl=5120, base=0xd0000000
/dev/v4l/video0 [v4l2]: configuration done
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 1280x1024, depth=24, bpp=32, bpl=5120, base=0xd0000000
/dev/v4l/video0 [v4l2]: configuration done
QDateTime::fromString: Parameter out of range
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
v4ldev::grab() [read]: error: wanted 614400, got rc = -1
Too many errors. Ending V4L grabbing.
QWidget::updateFrameStrut(): ERROR - no parent
QWidget::updateFrameStrut(): ERROR - no parent
V4LGrabber::~V4LGrabber(): wait().
V4LGrabber::~V4LGrabber(): deleted.

請各位大大幫幫忙

thanks

Kai
cching1112
 
文章: 7
註冊時間: 週六 8月 28, 2004 6:39 am
來自: 極端的年代

回到 Gentoo 多媒體

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 0 位訪客

cron